Wilson 500B Magnetic Mount CB Antenna
The Wilson 500’s higher gain performance for an economical antenna is the result of several design modifications to the famous Wilson 1000. Using the basic design of the W-1000, Wilson is able to produce a mid priced magnetic antenna with great performance characteristics. This produced the most powerful CB base loaded antenna available in its price range.
A large portion of the power that goes into a typical base loaded CB antenna is lost as heat in the coil and as dielectric heat loss in the plastic inside the coil form. Many CB antennas lose more than 50% of the power put into them. The power is wasted as heat loss and not radiated as radio waves. Another weak link in other CB antennas is the capacitor used to match the coax to the antenna, which is a cheap and easy way to make the SWR look good, but has lots of power loss, plus blows out when high power is applied to it.
Wilson’s first priority was to reduce the dielectric loss by removing as much of the plastic inside the coil as possible. This was accomplished by suspending the coil in air, supported only at four small points, 90° apart, in effect removing 95% of the plastic from the inside surface of the coil. This reduced the dielectric loss to a negligible amount.
The second priority was to get rid of the resistive heat losses in the coil. Since most of the RF energy at 27 MHz travels on the surface of the wire, it was decided to increase the surface area by making the diameter of the wire 12 gauge copper.
Features:
- 2000 Watt power handling capability (ICAS)
- Made with high impact Thermoplastic
- Heavy duty coil uses 12 gauge copper wire
- Exclusive low loss coil design (Patent #4,882,591) - Same as Wilson 1000
- 54" 17-7 PH stainless steel whip
- Frequency range 26 MHz to 30 MHz
- Weather Channel Ready
Included Accessories
- 54" Metal Whip
- 17’ Coax Cable
| 
