Tigertronics SLMOD13I Signalink Plug & Play Jumper Module ONLY for Icom Radios w/13 Pin Din Accessory Port
Tigertronics new "Plug & Play" jumper modules plug into the SignaLink in place of the jumper wires that you would normally use. This greatly simplifies installation and completely eliminates the possibility of installing the jumper wires incorrectly. Swapping radios is also easier, as you just unplug one module and plug in another. Most jumper modules are compatible with both the SignaLink USB and older SignaLink SL-1+.
SLMOD13I - This jumper module is compatible with all ICOM radios that have a 13-pin Accy Port. This includes but is not limited to the radios listed below. Be sure to see Tigertronics radio wiring and jumper settings page for any special notes on your radio (menu settings, etc.).
ICOM:
- IC-703
- IC-706, IC-706MKII, IC-706MKIIG
- IC-718
- IC-7000**
- IC-7200
**This radio does NOT mute the Mic jack when using the 13-pin Accy Port, so we recommend using the 6-pin Mini Din Data Port instead.
|
|
