SCANCATGOLDWIN Programming Software for Current Scanner


	Home


	Cart


	Contact Us


	Map & Hours

TOLL-FREE ORDER LINE: 1-888-426-1688 International: 905-665-5466

NO EXTRA CHARGE FOR CREDIT CARD ORDERS! Employment Opportunities

Printable version

Help

Durham Radio Sales and Service Canada :: Scanners :: Accessories :: Software & Computer Interface Cables :: SCANCATGOLDWIN Programming Software for Current Scanner

SCANCATGOLDWIN Programming Software for Current Scanner

Scancat-Gold for Windows now supports the Uniden Bearcat BC-296D, BC796D, BC-250, BC-785, BC-780, BC-245 and BC-895 TrunkTrackers.

PLUS Scancat can control not only the conventional operations of the BC-245/895, such as scanning, logging, spectrum analysis etc. but now does FULL TRUNKING !

Scancat permits you to selectively load the banks of the radio with all your favorite trunking frequencies and trunking group ID numbers. Of course Scancat can also read the radio's memory contents to files, including conventional trunking information.

With Scancat's support of over 85 radios, from over 10 Manufacture's, your software dollars go a long way. No need to buy several programs, one for each radio you own.

The chances are high that we already support all of your existing scanner and receiver equipment. And the best part is....all the equipment is supported in one program, no need to purchase seperate "drivers".

Just a few of the radios SCANCAT-GOLD for WINDOWS presently supports:

AOR-5000, AOR 3000 / (A), AOR-3030 HF receiver, AOR2700, AOR-8000, AR8200 and AR-16 (New handhelds)
DRAKE R-8, R-8A & R-8B (for "B" model Select R8A on menu). MOST Icom Radios such as R-75, R8500, IC-R10 and PCR1000, Kenwood Including TS-440, 450, 850 & R-5000
MOST Yaesus including FRG-8800 & FRG-9600. + FRG-100, FT-840 and MORE.
The NRD -525 & 535 Japan Radio. - LOWE HF-150 & HF250 - W/J HF1000 -
Uniden's new BC895 Trunk Tracker.
OPTO ELECTRONIC’S add-on boards for PRO series Radio Shack Radios

A completely revamped module to support trunking for the Bearcat Trunk-Trackers - BC-296, BC-796, BC-895, BC-245, BC-780, BC-250 and BC-785.

This software allows complete control of all functions supported by these radios through the standard manufacturer's interface. SCANCAT allows you to do the following:

- Enter any one frequency and increment up-down from that point.

- Enter any two frequencies and scan between them with ANY increment and variable time delay or pause.

- Scan a file of frequencies, search by description or wildcards.

- Create Databases of frequency files. Sort by any field, and save to disk or printer.

- Link up to 100 personal "Preset" frequency BANDS for SW, aircraft etc. including increment and mode. The most popular presets are included in the program.

- Link up to 100 personal frequency FILES for SW, aircraft etc.

MEMORY READ AND LOAD

With KENWOOD, ICOM, AOR and NRD-525/535 and most newer YAESU'S you can read to a file the radio's memories including the split Channels and mode and store them on a disk file.

The software system (Including on-line Help) implements a true windows style pop-up interface and is extremely user friendly. This is not just a 'dos program in a windows wrapper'. but an application written FOR windows.

With SCANCAT you can create unlimited files of up to 400 frequencies each. AND, WITH THE NEW SCANCAT-GOLD for WINDOWS, you have unlimited file sizes. The files can be sorted by any field, (Description, frequency etc). You can create these files while you are scanning between one /or two frequencies.

You can also access several pre-programmed (user re-programmable) "split offsets" such as for marine telephone. Press a button and log/add the entries to a disk file, complete with optional description, timestamp and comments.

SCANCAT will optionally check for either description OR frequency duplicates, eliminating multiples on long searches. After several hours, you can build a log-file of the found frequencies, including the number of times found and the last signal strength. You can pop up our "active' l spectrum chart of this analyisis at any time WHILE scanning.

SCANCAT-GOLD for WINDOWS has their exclusive, QUIKTERM, an integrated communications program to access a TNC. (Demodulator).. If you own a MFJ, PK232 or M7000 type demodulator for RTTY, or packet, you can instantly go back and forth between scanning and using the demodulator.

The communications program is built in to SCANCAT, not just an extra program. QUIKTERM uses split windows for receive and sending of your demodulated signals, as well as supporting disk & printer spooling of your output.

MORE SCANCAT-GOLD for WINDOW‘S NEW FEATURES

When you choose SCANCAT-GOLD you'll be using a truly advanced program that provides you with optimum use and simplicity. SCANCAT-GOLD is the best that we can produce. Of the many new features in SCANCAT-GOLD these are but a few that we just can't resist pointing out, features that will truly enhance your scanning efforts.

MULTIPLE SCANNING BANKS. Yes now you can actually scan several different frequency banks (up to 100 in fact) in the same pass. Click on any range to instantly change to that scanning.Toggle any or all on/off as you please.

MULTIPLE SCANNING DISKFILE BANKS. Yes now you can actually scan several different frequency FILES in the same pass. (up to 100 in all). Click on any file to instantly change scanning to the one selected.

UNLIMITED FILE SIZES. The 400 frequency barrier per file is gone forever. With SCANCAT-GOLD the number of records you can have in a file is now only limited by your disk space!

DUAL RADIO SIMULTANEOUS SCANNING (ICOM ONLY). If you own TWO Icom radios, one HF and the other VHF, you can program SCANCAT-GOLD to run 'em BOTH at the same time. Only ONE CT-17 Icom interface is required!

COMMA DELIMITED CONVERSION. Many database applications EXPORT their files for use by other systems in comma delimited format. SCANPORT-PRO can read and convert these to a SCANCAT frequency file for immediate use.

D-BASE SUPPORT. SCANPORT-GOLD can read and scan directly D-BASE files. D-BASE is the single most popular format used by 2nd party vendors for frequency database's. (PERCON AND GROVE Enterprises frequency database for instance).

DIRECT IMPORT OF PERCON’S CD-ROM EXPORT FILES.

DIRECT IMPORT OF MR. SCANNER’S CD-ROM EXPORT FILES.

DIRECT IMPORT OF TRS Consultant's SCHEDULES. Convert SCHEDULES (tm) Showrtwave Files Directly to a Scancat file. All Automated with no setups necessary.

Exclusive MACRO CONTROL PER RECORD. Complete programmable control of Signal Threshold, up to 6 ALARMS, & many variable timing delays, such as hang & dwell time PER RECORD. You now have COMPLETE control of your database scanning.

AUTOMATIC BIRDIE LOCKOUT and frequency bypass programming. WHILE scanning, lock out birdies, and even let SCANCAT build your own lockout table. Instant keypresses lockout unwanted frequencies.

TOP HITS TABLE. While SCANCAT-GOLD for WINDOWS is scanning, you are building a "TOP TWENTY" HITS table. Pop it up anytime you want. Pick up on sudden activity instantly for optimum scanning enjoyment.

CTCSS AND DCS tone search support with Opto Electronics boards or the DC-440 Tone reader used in conjuction with ICOM and CI-V interfaces.

AND MUCH MUCH MORE!