Rig Runner 4010SC Complete 10 Outlet Power Panel for Anderson Power Pole Connectors
A RIGrunner is the most convenient and safest way to connect all your 12 VDC equipment to a power source. It is a 13.8 VDC power panel that uses the excellent Anderson PowerpoleŽ connectors. Standardize all of your 12 VDC connections using the amateur radio ARES & RACES, RSGB, ARRL PowerpoleŽ system.
- One always on "MASTER" outlet and nine automatically or manually controlled switched outlets, 40 amps total.
- The control switch has three positions: "OFF", "ON" and "AUTO". If the switch is in the "OFF" or "ON" position, the switched outlets are either off or on. When the switch is in the "AUTO" position the switched outlets will automatically turn on or off whenever you turn on or off the radio, or another device, that is plugged in to the "MASTER" outlet.
- It uses a high performance FET switch rated at 90 amps max, with temperature and over current protection.
- Includes our unambiguous precision overvoltage and under voltage indicators with audio alert. The audio alert is selectable for over and/or under voltage or may be disabled.
- "Complete" Model Includes a 6 foot Power Supply Cable and a 12 pair package of 30A
FEATURES:
- Models 40xx are conservatively rated at 40 amps total with any outlet good to 40 amps!
- The 8012 is conservatively rated at 80 amps total with any outlet good to 40 amps!
- Anderson PowerpoleŽ connectors, the best DC connectors!
- Our PowerpoleŽ configuration conforms to the ARES, RACES, RSGB standard, and ARRL recommendation for high current 12VDC connectors.
- PowerpoleŽ connectors provide interoperability for emergency communications.
- Safe secure, HOT CONNECT, polarized, color keyed, genderless connector system.
- No messy binding posts, frayed wire connections, black tape or short circuits!
- High current! More than enough 12 V power for your station! Pick the appropriate model.
- Each outlet may be used at full ratings: transceivers, amplifiers or any accessory.
- Precision window comparator quick status power monitor, makes a voltage problem obvious.
- LED over and under voltage indicators instantly indicate a problem, without interpretation.
- An audio alert is configurable to alarm on overvoltage or under voltage (both on 4010 & 8012 only) or may be disabled.
- Each outlet is individually fused with automotive ATC/ATO fuses. Shipped with appropriate fuses installed.
- 40xx models can use any output jack as the power input with full ratings.
- ATC/ATO auto fuses are easy to get and are available in 10 values from 1 to 40 amps.
- Fuses are quick change; accessible from the outside using high quality fuse holders.
- Each fuse has a handy blown fuse LED illuminator to show short circuit problems instantly!
- RF suppression on each outlet to suppress RF leakage between equipment. Keeps your power supply in regulation.
- Commercial quality construction just like our RIGblasters. No Sharp edges, no plastic.
- A full array of quick change PowerpoleŽ power supply, extension and adapter cables available.
- One full year parts and labor guarantee, you pay only one way shipping, no warranty charges.
- Mounting with supplied 3M BumponŽ protective feet, 3MŽ adhesive pads or screwed down using any #6 or #8 screws.
Please compare our prices and products for this line very carefully with our competitors offers, as some stores sell the incomplete units for basically the same price as the Complete units we sell. We encourage you too take a close look and ask questions. |
|
