MFJ-266 Digital Antenna Analyzer with SWR & Impedance on HF/VHF & UHF Frequencies
The MFJ-266 covers HF, VHF, plus UHF amateur and commercial frequencies with digital precision. It also displays SWR, Complex Impedance, and Impedance magnitude simultaneously -- all on the same easy-to-read LCD screen. Use it to measure Capacitance, Inductance, Field Strength, Frequency, plus generate test signals. You can also fine tune stubs, analyze coax, test baluns and RF transformers, and perform many other important RF-related tasks around the shack or on the road!
The MFJ-266 covers all bases -- from 160 meters through 6 meters, the FM broadcast band, Airband, 2 meters, 70 cm, plus VHF/UHF commercial 2-way frequencies:
- Band A: 1.5 to 2.7 MHz
- Band B: 2.5 to 4.8 MHz
- Band C: 4.6 to 9.6 MHz
- Band D: 8.5 to 18.7 MHz
- Band E: 17.3 to 39 MHz
- Band F: 33.7 to 65 MHz
- Band V: 85 to 185 MHz
- Band U: 300-490 MHz
MFJ-266 can be powered from eight internal AA alkaline batteries or from optional 12VDC/110 VAC adapter, MFJ-1312D. With the long storage life of alkaline batteries, your analyzer will always be ready to go when you are.
In SWR Mode, the MFJ-266 reads SWR 1:1 to 9.9:1, Impedance Magnitude 10-500
Ohms and Complex Impedance (resistance and reactance). Best of all, it displays all three parameters simultaneously and operating frequency with one quick glance. No other low-cost handheld analyzer offers this! (Note: Z-mag and R+jX not displayed on UHF).
|
|
