Workman MAD-1 Headset with Boom Microphone for Hands Free CB Operation

Head Set with Adjustable Boom Microphone. Simple to Install. Prewired for Standard 4 Pin Hookups: Cobra, Uniden, Galaxy, Newer Midland and Most all 10 Meter Radios Using 4 Pin Microphones Jacks.

NOTE: Although this unit is wired for 4 Pin Radios, we sell a variety of adapters that will allow you to operate this unit with other radio wirings such as 5 Pin Cobra, 5 Pin HR2510, 6 Pin Delta Force, 5 Pin Din Radio Shack and more.... See the bottom of this page for available adapters!!!

GENERAL FEATURES:

• Microphone Type: Dynamic
• PTT Switch Mounted with Velcro
• Frequency Response: 100-10Khz
• Impedance: 500 Ohms
• Sensitivity: -80dB @1Khz

Connect the cord that has a 2 pin male connector from the headset to the top of the Push to Talk box. The other wire that comes out from the microphone plug is plugged into the external speaker jack at the back of the radio. Adjust the boom microphone for the best transmit quality.