LDG AT-600 PRO 600 Watts SSB & CW Autotuner, 250 Watts on 6M, 4000 Memories

2 Year Manufacturers Direct Warranty Handled by LDG in Maryland.

Purchase any LDG Auto Tuner Between October 15th, 2011 & April 15th, 2012 and Receive a FREE Balun/Unun via Mail In Rebate from Directly from LDG, To get the rebate form CLICK HERE

The AT-600Pro will handle up to 600 Watts SSB and CW and 300 on RTTY (1.8 – 30 MHz) and 250 watts on 54 MHz. It features LDG’s state-of-the-art, processor-controlled Switched-L tuner. It will match virtually any kind of coax-fed antenna, including Yagis, dipoles, inverted Vs, slopers, loops, just about anything. It will typically match a 10:1 SWR down to 1.5:1 in just a few seconds. You can also use the AT-600Pro with longwires, random wires and antennas fed with ladder line just by adding a balun.

The AT-600Pro features two antenna ports with a front-panel indicator showing which is in use, and separate memory banks for each antenna. Easy to read LED bar-graph meters showing RF power, SWR and tuner status, tactile feedback control buttons and an LED bypass indicator complete the user interface. Any power source from 11 – 16 volts DC can be used; the AT-600Pro draws only 750mA during a tune cycle, much less when not tuning.

General Specifications:

• 600 Watts SSB and CW, 300W RTTY (250 watts on 6M)
• Easy to read LED bar graph display for RF power, SWR and status
• 4,000 memories for instantaneous band changing
• Two position antenna switch with memories for each position
• Tuning time: 0.5 to 6 seconds full tune, 0.1 second memory tune
• Built in frequency counter for memory operation
• Frequency coverage: 1.8 to 54.0 MHz.
• Tunes 6 to 1000 ohm loads (16 to 150 ohms on 6M)
• For Dipoles, Verticals, Vs, Beams or and Coax Fed Antenna
• Includes DC power cable.
• Power requirements: 11 to 16 volts DC at 750 mA max during tuning
• Enclosure: 10.5D x 8.5W x 2.5H inches
• Weight: 3 pounds