Kenwood TMV-71A Dualband Transceiver with Built in Echolink

Get The KRS-V71 Programming Software & USB Cable Kit For $44.95 ($10 Savings) When You Order the TMV71A Radio as well.. YOU MUST ASK FOR THIS OFFER WHEN ORDERING. If Ordering Online Add it to the Comments Section.

SPECIAL LIMITED TIME OFFER, Buy The PG5H PC Interface Cable Kit For $64.95 ($15 Savings)with the Purchase of this Radio. YOU MUST ASK FOR THIS OFFER WHEN ORDERING. If Ordering Online Add it to the Comments Section.

The advanced Kenwood TM-V71A dual bander provides sophisticated, high-powered performance on 2 meters and 440 MHz. Power levels are 5/10/50 watts on both bands. The large radio display clearly conveys the status of the radio and can be set to green or amber. The radio's controls are very logical and feature separate volume/squelch for bands A and B.

This transceiver allows you to change the orientation of the front panel. Depending on where/how you installed the transceiver you may wish to flip the front panel upside-down for easier operation. 1000 Memories can be alpha tagged up to six characters. Other features include: scanning, weather alert, password, dual receive on same band and cross-band operation. This dual bander has ten dedicated EchoLink® memory channels as well EchoLink sysop-mode operation. The rear panel has dual audio outputs.

FREQUENCY COVERAGE

RX: 118 - 524 MHz 136 - 524 MHz 800 - 1300 MHz * (*excluding cellular band)

TX: 144 - 148 MHz 430 - 450 MHz

RF Power Output

5/10/50 Watts on Both VHF and UHF

Dual Receive On Same Band (VxV, UxU)

In addition to simultaneous receive on both VHF and UHF bands, this radio can receive two frequencies on the very same band. This means, for example, that you can have both the call channel and local channel, or the repeater channel and local channel, on the same band.

Five-In-One, Programmable Memory

For extra versatility, the TM-V71A has a programmable memory that can store five entire operating profiles, ready for instant recall at the push of a button. Each profile includes such settings as display mode, frequency range, and memory mode. It can equally be used to switch between 5 VFO frequencies.

1000 Multifunction Memory Channels

There are 1000 split memory channels for storing essential data such as transmit and receive frequencies, frequency step, and tone frequency.

Plus an additional 10 for programmable scan. You can identify each channel with up to 6 alphanumeric characters (Memory Name function). Additionally, memory data can be edited and stored on a PC using the optional PG-5G programming interface cable and MCP-2A Memory Control software

Multiple Scan

As well as VFO scan, program scan, MHz scan, memory scan and call scan, the TM-V71A offers memory bank scan: the 1000 channels are grouped into 10 banks for selective scanning. Also featured are scan resume (time-operated, carrier-operated, and seek), memory channel lockout, tone scan, CTCSS scan, and DCS scan.

Invertible Front Panel

For greater installation convenience, the detachable front panel can be inverted so the transceiver can be mounted upside down, thus ensuring that the speaker is not obstructed.

Choice Of 2 Backlight Colours

To maximize visibility, the backlight colour for the large LCD panel can be switched between warm amber and cool green.

104-Code Digital Code Squelch

In addition to CTCSS (42 subtone frequencies), the TM-V71A is equipped for DCS (104 codes). Whatever code is chosen, the squelch will only open for reception if the other party uses the identical code.

Voice Guidance & Storage Option (VGS-1)

The audible announcement function is enabled for blind-key operation using the optional VGS-1 unit, which also provides up to 30 seconds of continuous recording.

Weather Alert/RX (US only)

This transceiver is capable of receiving the NOAA Weather Band and responding to emergency transmissions such as storm warnings by emitting an audible alert tone.

EchoLink® Sysop Mode For Node Terminal Operation

When the TM-V71A is connected to a PC (with the necessary Windows-compatible software installed) using the PG-5H option, it can operate as a node terminal for EchoLink®. EchoLink® connects radio amateurs through the Internet using VoIP technology: any transceiver with access to a node can connect to any other in the world as long as it too has node access. It is also possible to access the EchoLink® network directly from a PC. To register for EchoLink® (using your call sign), access the official website at www.echolink.org.

EchoLink® Memory (Automatic Dialer)

Up to 10 DTMF memory channels dedicated to EchoLink® can store call signs (or conference names) and Node Numbers.

What's in the Box?

• TMV71A Transceiver
• MC59 DTMF Hand Mic
• DC Power Cable
• Front Panel Mounting Bracket
• Main Unit Mounting Bracket
• Instruction manual