ICOM RX-7 Scanner Icom .150 - 1300MHz Full Coverage Handheld Scanner
The Icom IC-RX7 is a slim and smart wideband receiver that tunes from 150 kHz to 1300 MHz in these modes: AM, FM Narrow and FM wide. It features a large, backlit LCD display plus a nice keypad. It is rain resistant to equivalent IPX4 standard. CTCSS and DTSC decode is built in. Other features include: keypad, RF gain, attenuator, auto power save and voice squelch control. A built-in ferrite rod antenna provides good medium wave [AM] reception.
A total of 1650 scannable alpha-numeric memories are available. An independent search button automatically searches pre-programmed frequency ranges. Many sophisticated forms of scanning are supported.
The IC-RX7 comes with the BP-224 Lithium battery, MB-112G belt clip and BC-149A charger and ducky antenna.
FEATURES:
- Easy to use menu interface
- One touch search buttons
- One touch scan button
- Efficient 3 level memory management
- Computer programmable with optional software
- 0.150-1300MHz Wide Frequency Coverage
- Slim, stylish and lightweight
- Tone control function and audio filter
- Splash resistant construction equivalent to IPX4
- Large, backlit full dot-matrix display
- High speed scan and high speed search (100ch/sec.)
- CTCSS/DTCS decode with pocket beep function
- VSC (Voice Squelch Control)
- Built-in RF-gain control and attenuator
- Built-in AM bar antenna
- Earphone antenna function for FM broadcast RX
- VFO mode operation
- CI-V PC remote control capability with optional CT-17
- Auto power save function
- DC power jack for external DC operation
General Specifications:
General
- Frequency Range : 0.150 - 1300.000 MHz
- Mode: FM, WFM AM
- Tuning Steps: 5, 6.25, 7.5, 8.33, 9, 10, 12.5, 15, 20, 25, 30, 50, 100, 200 kHz
- Scan/Search Speeds: 100 channels per second/30 steps per second
- Number of Memory Channels: 1650
- Usable Temperature Range: -10°C to +60°C; +14°F to +140°F
- Current Drain (at 3.0 V DC):
, Rated Audio: 150 mA typ.
, Standby: 100 mA typ.
, Power Saved: 35 mA typ.
- Power Supply Requirement: 3 x AA (R6) Ni-Cd or alkaline cells
- Antenna Connector: SMA (50 ohms)
- Dimensions: 2.25(W) x 3.1(H) x 0.8(D) inches (57 x 128 x 23 mm) (projections not included)
- Weight: 7.1 oz. (200 kg)
|
|
