Icom IC-V80 Handheld Icom 2 Meter Transceiver, 207 Memories
The Icom IC-V80-25 offers rugged, basic 2 meter performance in a rock solid package. You can select 5.5, 2.5 or 0.5 watts of output. Extended receive is 136 to 174 MHz. Enjoy built-in CTCSS/DTCS Encode and Decode. 207 memory channels are featured including 6 scan edge and 1 call. And each memory can be labeled with up to 5 characters. Multiple scan types are available. The easy-to-use controls are very intuitive. The display backlighting may be set for On, Off or Off after 15 seconds of inactivity. There are also DTMF memory channels. Other enhancements include: wide/narrow selectivity, removable jack cover, 750 mW of audio, backlit alpha display,keypad, repeater lock-out, auto-repeater function, time-out timer and auto power off.
750mW Loud Audio:
The IC-V80 uses the BTL (bridge-tied load) amplifier that doubles the audio output. Every ham knows that power = current × voltage. The V80’s BTL increases the audio output by doubling the voltage delivered to the speaker.The 36mm large speaker delivers 750mW of loud and intelligible audio*. Great for noisy environments.
*Typical value using with internal speaker.
Powerful 5.5W of Output Power:
The IC-V80 offers a just-right mix of power and size. 5.5 watts of high power will work to get your message through. Get up to 19 hours* of operating time with the Li-ion battery pack (BP-265) or 13 hours* with the Ni-MH (BP-264). All that power comes is an easy to hold and use size – not too big, not too small.
*Typical operation. 5:5:90 duty cycle with power save on.
IP54 and MIL-STD-810 Rugged Construction:
The dust protection and water-resistance equivalent to IP54 provides reliable operation for practical outdoor operation. The IC-V80 tested to and passed 11 categories of MIL-STD-810 environmental tests.
A Total of 207 Memory Channels:
The IC-V80 has a total of 207 memory channels, including 200 regular channels, 6 channels, including 200 regular channels, 6 scan edges and 1 call channel. The channel name is programmable with 5 characters for easy recognition.
Built-in CTCSS/DTCS:
The CTCSS and DTCS tone codes provide quiet stand-by and allow you to use tone-access repeaters. The pocket beep alerts you when a matching tone frequency is received. The tone scan detects the subaudible tone that is used for repeater access.
Internal VOX function:
The IC-V80 has internal VOX (Voice Operated Transmit) function for convenient hands-free operation with a compatible optional headset and plug adapter cable. Also, the VOX gain and VOX delay time are adjustable.
Additional Features:
- WX channel and weather alert function (USA version only)
- Program, memory, skip, priority and tone scans
- Power save function
- BNC type antenna connector
- Automatic repeater function (USA version only)
- 1750Hz tone for European repeater access (IC-V80E only)
- TOT (time out timer) setting
- Repeater lockout and busy channel lockout
- PC programmable with optional CS-V80
- Transceiver-to-transceiver cloning (Optional)
- Direct keypad frequency entry
- DTMF autodial memories
- Auto power off
- LCD backlight
- Wide/narrow channel spacing
What's in the Box?
- ICV80 Transceiver
- BC-192Wall Charger
- BP-264, 7.2V 1400mAh
- Belt Clip
- BNC Flex Antenna
- Owners Manual
|
