Icom IC-7800 HF & 6 Meter Transceiver with DSP
This new radio covers the HF ham bands plus 6 metres (receive from 30 kHz - 60 MHz). The high resolution 7 inch TFT color LCD display provides more operating information than you've ever had before, including a spectrum scope.
This is clearly the most advanced amateur radio ever developed. It utilizes four separate 32-bit floating point DSP chips, has a 7-inch wide TFT display, built in RTTY/PSK31 receive and transmit plus compact flash technology.
As impressive as the features are, it is performance that sets this radio apart. Sparing no expense, an incredible +40dBm intercept point has been achieved with ultra wide dynamic range.
Enjoy this incredible performance in two fully independent receiver circuits controlled on the left side of the radio. There is even a separate preamp and mixer for the 6 metre band. The rear panel features four primary antenna inputs (SO-239) plus provisions for receive antenna A and B.
And nothing is sacrificed on the transmit side. The newly designed push-pull MOSFET amplifiers work with a 48 VDC, providing a powerful 200 Watts of output at full duty cycle with low IMD in all bands. A 120 VAC switching power supply is built-in.
Supplied accessories include: rack mounting ears, compact flash (64 MB) and various plugs (mic not supplied).
Specifications and Features:
- Four 32-bit Floating Point DSP
- +40 dBm ultra high Intercept Point
- Automatic Tracking Preselector
- Two Independent Receiver Circuits
- 200 Watts Output
- Ultra High Frequency Stability OCXO
- 7 Inch Wide Color TFT LCD
- Multi-Function Spectrum Scope
- RTTY/PSK31 operation without PC
- Antenna Control
- Synchronous AM Detection
- Multiple Scan Formats
- Screen Management
- Manual Digital IF Notch Filter
- Professional 6 Metre Receiver
- Digital Voice Recorder
- Compact Flash Memory Slot
- Built-in Voice Synthesizer
- CW Audio Peak Filter
- High Speed Automatic Antenna Tuner
- Main/Sub Receiver Connections
- RS-232C Connection Port
- Ethernet Port
- Dual Passband Tuning
- Configurable AGC Loop Management*
* The engineering team at Icom redesigned the AGC loop management of the IC-756 ProII. Combining the digital IF filter, manual notch and now the 1st IF stage, these are all controlled by the DSP unit.
110 dB of ultra wide dynamic range in the receiver, means the IF amplifier is distortion free from strong signals.
|
