Covers 160-10 metres plus 6 and 2 metres all mode. 100 Watts of output is available on all bands - HF, 50 MHz and 144 MHz, making the IC-746 a practical choice for all-around base station use.

The die-cast aluminum chassis and a large cooling fan help to stabilize the PA circuit, providing 100% full duty cycle operation.

The PRO version features 32 bit floating point DSP and 24-bit AD/DA converter. This combination dramatically improves receiver performance providing ultra wide dynamic range and good third order intercept point.

Plus there are NO more expensive optional filters to buy. The digital IF filter allows your to select 51 filter bandwidths. There are three user selectable filter memories per mode. Soft and sharp filter shapes can be selected in both SSB and CW modes independently. You can also change the settings on the fly and compare!

For repeater operation there's is a built-in tone encoder and decoder with 50 CTCSS and 108 DTCS based tones. There is even a built-in Baudot RTTY demodulator.

The 746 Pro requires 12 VDC at 23 amps. The IC-746 Pro comes with HM-36 hand mic, spare fuses, DC power cable and key plug.

Specifications and Features:

• 100 Watt Output 40 Watt Output (AM)
• Digital IF selectable filter with width and shape
• Microphone Equalizer
• Monitor Transmit Audio
• SWR Plotting
• Built-in Automatic Antenna Tuner 180-6 Metres
• Full Break-In CW
• SSB/CW Synchronous Tuning
• 100% Duty Cycle
• RX Antenna Jack
• 32 bit DSP
• 1 Hz Readout
• 4 Channel Memory Keyer
• RTTY demodulator and decoder
• Manual notch
• Digital twin-band PBT
• Microphone equalizer
• Band scope function
• All-mode in all bands
• Twin PBT, APF, VOX, FSK
• CW electronic and memory keyer
• Triple band stacking register
• CTCSS Encode and Decode
• General coverage receiver
• DSP circuits for noise cancelling, notch, passband IF transmit audio monitor
• Dimensions: 11.3 (W) x 4.7 (H) x 12.5 (D) inches, 19 lbs