GALAXY DX2517 10 METER BASE TRANSCEIVER
The DX2517 10 meter base station radio was among the first to use the new second generation main board. The new board offered this unit unparalleled frequency stability and sensitivity on both AM and SSB making the DX2517 an immediate success. It has all the features you would expect like oversized meters, 5 digit frequency counter and 25 watts of SSB power. As good as any model in its price range an excellent radio for people on a budget or just starting in amateur radio.
General Features:
- 10 meter AM/FM/SSB/CW radio
- New main PC board for increased stability and sensitivity
- Five digit frequency counter
- Two large, easy-to-read meters
- Meter scales for signal, power output, SWR and modulation (AM only)
- Variable dimmer control
- Transmit/receive LED
- Noise filter circuit for increased signal-to-noise ratio
- On-demand" switchable talk back circuit with volume control, +10 KHz switch
- Noise blanker-automatic noise limiter
- Roger beep
- Mic gain
- Receive gain
- PA
- Echo Board
- Variable output power
- Dual clarifier - 1.5 KHz clarifier for receive only - 5.0 KHz clarifier for receive and transmit
Other Features:
- 10 meter frequency range 28.765 - 29.205 MHz
- Emission Types CW, FM, AM, USB, LSB
- Frequency control phase-locked-loop synthesizer
- Frequency tolerance 0.01% frequency stability 0.00%
- Temperature range -30'C to 55'C
- Antenna impedance 50 Ohms
- Antenna connectors standard SO-239 type
- Meter functions: Meter #1 RF output power/ antenna SWR, meter #2 received signal strength and modulation level.
- Transmitter: RF power output 25 to 30 watts
- AM modulation 100% - once tuned.
- Frequency control: Clarifier range +/- 5 KHz transmit and receive, +/- 1.5 KHz receive only,
- spurious emissions -60dB, carrier suppression -60dB
- Receiver: Sensitivity for 10dB S/N AM 0.5uV, Sensitivity for 20dB S/N FM 0.5uV, Sensitivity for 10dB S/N USB/LSB 0.3uV
- Adjacent channel rejection -60dB
- Image rejection ratio -50dB
- AGC figure of merit SSB/AM: 80dB for 50mV for 10dB change in audio output
- Audio output power @ 10% THD 2.5W
- Input Voltage AC 120V, 60Hz
- Dimensions: 19"W x 6-1/2"H x 14"D (with handles)
|
|
