The Yaesu FT 8900R Quad Band Amateur Transceiver is a ruggedly-built, high quality Quad Band FM transceiver providing 50 Watts of power output on the 29/50/144 MHz Amateur bands, and 35 Watts on the 430 MHz band.
It includes leading-edge features like cross-band repeat, dual receive, VHF-UHF Full Duplex capability, and over 800 memory channels.
It's 10-meter FM coverage brings the possibility of world-wide FM DX-ing to you on your drive in to work!
Convenient Remote-Head Mounting Capability Having
trouble mounting your mobile radio in your compact car? With the FT8900R
and its optional YSK-8900 Separation Kit, mounting is a breeze even in
the tightest locations. The YSK-8900 includes a 20’ (6 m) remote cable
and a mounting bracket for the front panel, and the microphone jack is
located on the side of the front panel, eliminating the need to run a
separate cable.
Convenient Access to WIRES and other Internet-linking Systems
When six and ten meters are dead, you can still talk around
the world with the FT-8900R! The front panel provides easy access to any
WIRES™ (Wide-coverage Internet Repeater Enhancement System) repeater,
automatically sending the required single DTMF access code at the beginning
of each transmission. And if you’re using another Internet linking system,
one that requires a DTMF string to being up the link, you can easily configure
the FT-8900R to store and send the required tone sequence, as well!
Quad Band Operation The FT-8900R combines
the “traditional” 144/430 MHz local-communications concept with the exciting
capability for Sporadic-E or F2 DX on the 29 MHz and 50 MHz bands, for
nationwide or worldwide FM communications from your car! The first Amateur
Radio FM mobile transceiver providing this capability, the FT-8900R will
make you wonder how you got by with a two-band transceiver up to now!
Wide Frequency Coverage The FT-8900R
provides extended receiver coverage beyond the Amateur bands, so you can
keep informed of communication activities in the public safety, commercial,
aircraft, and government communications ranges. Included is coverage of
28-29.7 MHz, 50-54 MHz, 108-180 MHz, 300-480 MHz, and 700-985 MHz (cellular
frequencies are blocked and non-restorable).
High Power Output To get your message
through when it counts, the FT-8900R puts out a full 50 Watts of power
on the 29/50/144 MHz bands, and 35 Watts on 430 MHz. To ensure thermal
stability during long transmissions, a thermal sensor monitors heat sink
temperature, engaging the rear panel’s cooling fan only when needed.
Over 800 Memory Channels The FT-8900R
provides a wide variety of memory resources, including 799 “regular” memories,
six “Home” channels for favorite frequencies, five sets of band-edge memories,
and six “Hyper Memory” memories, which store complete transceiver operating
status, for maximum operating efficiency and convenience. Six-character
Alpha-Numeric “Tags” (labels) may be appended to memory channels, affording
instant channel identification. No transceiver can compare with the memory
capability of the FT-8900R!
Cross-Band Repeat Capability For emergency
work, or to extend the range of a hand-held unit, the FT-8900R includes
Cross-Band Repeat capability, similar to that pioneered on our popular
FT-8100R Dual Band FM Mobile!
One-Touch Band-Pattern To save valuable
time while operating a transceiver with the versatility of the FT-8900R,
the “Hyper Memory” feature allows you to store a complete set of configuration
data for the two bands on which you’re operating. Besides the usual storage
of frequency and tone data, Hyper Memory will store such setup parameters
as Automatic Repeater Shift status, Packet parameters, Scanning mode,
and VFO tracking, avoiding the need to change each of these functions
manually on a regular basis.
CTCSS and DCS Encoders Built In Providing
excellent performance even under difficult link conditions, Yaesu’s 50-tone
sub-audible CTCSS and 104-tone DCS signaling systems ensure that you have
full access to repeater and remote-base inputs, and the built-in CTCSS/DCS
decoders allow silent listening on busy channels. Plus you get Tone Search
Scanning, which will scan for the tone being received on an incoming signal,
allowing you to match tones quickly when operating on a new repeater system
Easy Setup for FM Satellite Operation For
operating on FM satellites like UO-14, the versatile memory system of
the FT-8900R allows you to store a set of uplink and downlink frequencies
that account for Doppler shift over the entire horizon-to-horizon pass,
allowing you to select the optimum uplink/downlink combination effortlessly!
Truly Independent Two-Channel Operation Basically
operating as two radios in one, the FT-8900R may be configured in a number
of ways. For example, you can set up the "left" side of the rig for operation
on 29, 50, 144, or 430 MHz operation, while setting the "right" side either
to 144 MHz or 430 MHz. And, if you like, you can configure the FT-8900R
for 144-144 MHz or 430-430 MHz Dual Receive operation, so you'll never
miss out on the action! The left and right sides have their own Volume
and Squelch controls, as well as S-Meters, so your operating preferences
are never compromised. |
OPTIONAL ACCESSORIES LIST AT THE BOTTOM OF THIS PAGE:
|
|
