The Uniden BC-340CRS Tabletop Scanner

• 100 Channels - You can program each of these memory channels to store one frequency.
• 10 Priority Channels - Designate a specific frequency as a Priority Channel. Then the radio scans and checks that channel every two seconds. Select and designate up to 10 frequencies as Priority Channels (one per bank).
• Duplicate Channel Alert - Lets you know that a selected frequency has already been programmed into memory if you attempt to store it again.
• Limit Frequency Searching - Lets you designate lower and upper frequency range and search within that range for active frequencies. You can then store frequencies in memory as channels for later recall.
• Channel Memory Scanning - Scans frequencies you have stored in any of the channels or banks at a rate of up to 60 channels per second.
• Direct Channel Access - Press 0 - 9 and HOLD to directly access any stored frequency.
• Channel Lockout/Frequency Lockout - Skip over stored frequencies (channels) using the Lockout feature to enable faster scanning. Lets you designate up to 50 frequencies to skip during a search (limit or service) to increase the scanning speed.
• Alarm Clock with Snooze - provides standard radio broadcasts that you can set as your alarm sound.
• AM/FM and TV Channel 2-13 Audio - lets you store up to 30 preset broadcast channels (10 AM and 20 FM/TV) for quick access.
• EEPROM Memory Backup - The BC340CRS uses a non-volatile EEPROM for memory backup. You will not lose your memory channels even if the power is out and your batteries die.
• Battery Alert - A battery icon alerts you to a no battery installed condition and a battery low voltage condition. An alert tone sounds when the battery needs to be replaced. The battery provides backup for the clock when power is off.
• Emergency Power Operation - Your BC340CRS will continue to operate even when you lose commercial power using the 3 (not included) AA batteries.
• Full Frequency LCD Display - Shows the channels being scanned and the frequency entered into each channel with backlit display.
• Service Search - Lets you designate one of the five preprogrammed service channels (Police, Fire/EMS, Air, Marine and Ham Radio.)
• Manual Channel Access - Go directly to any channel without stepping through other channels.
• Weather (WX) Scan - Scan the preprogrammed weather channels.
• Scan and Search Speed - 60 channels per second maximum in SCAN MODE. 60 steps per second maximum in SEARCH MODE. 180 steps per second for frequency steps 5 KHz apart.
• Clock Display - The BC340CRS in standby mode will display the time. The clock also features an alarm that can sound up to 20 minutes or be shut off manually. A convenient snooze button lets you silence the alarm for an extra 5 minutes of sleep.
• Delay - You can enable or disable the 2-second delay to resume scanning when a transmission ends. Enabling this feature helps prevent missing a response from one of the parties in the transmission.
• LCD Backlight - You can enable or disable the LCD back lighted display.
• Key Touch Tone - A tone sounds to confirm you have made a valid key input while a different tone sounds to alert you to an invalid entry.