Alinco DJX-11K Wideband Full Coverage Handheld Scanner .50Mhz to 1.3Ghz

The Alinco DJ-X11T wideband receiver covers 50 kHz to 1299.995 MHz in AM, FM wide, FM narrow, SSB and CW modes. The illuminated LCD display supports two lines. In addition to frequency information, it will also show the operating mode, memory channel, battery strength, signal strength and a number of other user-selected operating parameters. The keypad is backlit. Six types of memory banks are supported. The DJ-X11T even supports dual frequency simultaneous reception giving you the ability to concurrently listen with the main band and sub band (with some frequency limitations). Please note that sub band coverage is 118-174 MHz and 336-470 MHz. The F tuning function allows you to automatically tune very strong, nearby signals. The built in MW ferrite bar antennas provides good AM band reception

The DJ-X11T features 1200 memory channels and three scan speeds are available. There is also a very novel IQ signal and IF output feature. The IQ signal output can be used with third-arty software (not supplied) to operate as a software defined radio (SDR). The 10.7 MHz IF output can be used with other receiver-related software on the Internet (not supplied). The supplied SMA antenna is removable.

Details & Features:

• 2VFO simultaneous RX
• Main-band coverage: 0.05 ~ 1,299.99995MHz all mode AM/FM/WFM/SSB/CW (BFO for SSB/CW receive. An external antenna required for practical HF monitoring. Internal bar antenna for AM broadcast reception and earphone antenna feature inclusive.)
• Sub-band coverage: VHF:118 ~ 171MHz/UHF:336�`470MHz in AM/NFM
• 1200 memory channels with adjustable memory banks using utility freeware (optional PC cable required)
• IQ signal and Discriminator output features: DJ-X11 has an IQ signal output that can be used with 3rd-party software to operate as a SDR. 10.7MHz IF discriminator signal can be used with other receiver-related software available on the net such as AIS-plotting.
• Voice-guidance system reads entering/entered frequency in English
• Easy-to-use twin dials
• Pocket size unit measures 61 (W) x 106 (H) x 38 (D) mm / 2.4 (W) x 4.17 (H) x 1.50 (D) in (without projections)
• Rigged Polycarbonate body with rubber protectors
• Selectable tuning steps: 0.05/0.1/1/5/6.25/8.33/9/10/12.5/15/20/25/30/50/100/125/150/200/500kHz/1MHz
• Various scan modes: Preset, programmed, memory, VFO and tone scan
• 3 selectable scan speeds (VFO: 25ch/s, 33ch/s, 100ch/s, Memory: 4.5ch/s, 8.3ch/s, 20ch/s)
• TSQ and DCS decode
• Wire remote-control using optional EDS-12
• Long-lasting 1800mAh Li-Ion battery pack provides nearly 15 hours of operation at full audio output in a single RX mode
• 1200 Alphanumeric (up to 16 characters) memory channels
• Additional 100 memory channels are available for each Dual-mode memory, Search-pass, Priority monitoring and Programmed Scanning pairs
• Large, brightly illuminated full dot-matrix LCD and keypads
• Dual channel-scope (Alinco's patented spectrum-analyzer alike feature)
• Frequency counter and flash tune
• "Bug detector" function searches for hidden transmitters
• Illuminated keypad for comfortable operation
• Standard Drop-in charger fully charges empty EBP-74 in 4 hours
• RF gain and attenuator for both main/sub VFOs

• EBP-74 3.7V 1800 mAh lithium ion battery
• EDH-36 Dry Cell "AA" Battery Holder
• EDC-139 AC adapter
• EDC-174 Drop-in Li-ion charging tray
• SMA flexible antenna
• Belt clip and hand strap.
• 2.4 x 4.17 x 1.5 inches
• 8.3 oz.